Mulch calculator

See how much mulch to buy for your beds. Enter the size and depth, and the calculator shows the volume in cubic yards for a bulk order and the number of bags to buy, rounded up. Add prices to compare bags with bulk.

Your bed
2 to 3 inches is common
Printed on the bag
Prices (optional)

Bags to buy

25 bags

  • Area200 sq ft
  • Volume50 cu ft
  • Bulk order1.85 cu yd
Cost in bagsAdd a price
Cost in bulkAdd a price

Keep mulch a few inches away from tree trunks and plant stems.

How the mulch calculator works

Mulch is sold by volume. The calculator multiplies the bed's length and width to get the area, then multiplies by the depth (converted from inches to feet) to get cubic feet. It divides by 27 for cubic yards, the unit bulk suppliers use, and divides by the bag size for the number of bags, rounding up to whole bags.

Bagged mulch commonly comes in 2 cubic foot bags, but 1.5 and 3 cubic foot bags are also sold. The size is printed on the bag; enter it so the bag count matches what's on the shelf.

The formula

Cubic feet = length × width × (depth in inches ÷ 12)
Cubic yards = cubic feet ÷ 27  ·  Bags = cubic feet ÷ bag size, rounded up

Worked example

A 20 by 10 foot bed covered 3 inches deep with 2 cubic foot bags:

Mulch needed for the worked example
Area (20 × 10)200 sq ft
Volume (200 × 3 ÷ 12)50 cu ft
Cubic yards (÷ 27)1.85 cu yd
2 cu ft bags (÷ 2)25 bags

At 2 inches deep the same bed needs 17 bags. At this size, a bulk order of about 2 cubic yards is also worth pricing, especially if delivery is free.

Tips for mulching

Measure odd-shaped beds in pieces

Curved beds rarely match a neat rectangle. Break them into rough rectangles, add up their square footage with the square footage calculator, and enter the total as the length with a width of 1.

Don't pile it against trunks

Mulch heaped against a tree trunk, sometimes called a mulch volcano, holds moisture against the bark and can invite rot and pests. Spread it in a wide, even ring and pull it back a few inches from the trunk.

Choose the right depth for the job

Thin layers break down fast and let weeds through. Very thick layers can keep water and air from reaching roots. A few inches is enough for most beds; top it up each year as it breaks down.

Frequently asked questions

How deep should mulch be?

A layer of about 2 to 3 inches is a common recommendation for garden beds, and Scotts suggests 2 to 3 inches to block weeds. Extension services often recommend 2 to 4 inches around trees and shrubs. Keep mulch a few inches away from trunks and stems so the bark stays dry.

How many bags of mulch are in a cubic yard?

A cubic yard is 27 cubic feet, so it takes 13.5 bags of 2 cubic feet each, or 18 bags of 1.5 cubic feet. Round up to whole bags: 14 or 18.

How much area does a bag of mulch cover?

A 2 cubic foot bag covers about 8 square feet at 3 inches deep, 12 square feet at 2 inches, or 24 square feet at 1 inch. Divide 12 by the depth in inches and multiply by the bag size to find the coverage for any bag.

Is bulk mulch cheaper than bags?

For larger jobs it often is. Landscape suppliers sell mulch by the cubic yard, but they may charge a delivery fee or have a minimum order. Enter both prices to compare them for your project.

Should I remove old mulch first?

Not usually. Rake it to loosen it and top it up to the depth you want. Scotts notes that old mulch generally doesn't need to be removed unless the layer is already more than about 4 inches thick. If it is, take some out before adding more.

Does mulch settle after I spread it?

Fresh, fluffy mulch can settle a little over the first few weeks, especially shredded bark. If you want the bed to stay at a certain depth, spread it slightly deeper than your target or plan a light top-up later.

Sources

Results are estimates for planning purchases. Check product coverage, local building codes, and manufacturer instructions before you buy or build.

All home and diy calculators