How the concrete calculator works
Concrete is ordered by volume. The calculator works out the volume of your pour in cubic feet, adds your waste allowance, and converts the total to cubic yards, the unit ready-mix suppliers use. It then divides by the yield of one bag to find how many bags to buy, rounding up so you don't run short.
Bag yields come from QUIKRETE's Concrete Mix data sheet: about 0.60 cubic feet for an 80 lb bag, 0.45 for a 60 lb bag, and 0.30 for a 40 lb bag. Other brands and specialty mixes can differ, so change the yield to match the number printed on your bag.
The formula
Slab volume (cu ft) = length × width × (thickness in inches ÷ 12)
Round volume (cu ft) = π × (diameter ÷ 2)² × depth ÷ 1,728
Bags = volume × (1 + waste %) ÷ yield per bag, rounded up
Round holes are measured in inches, so dividing cubic inches by 1,728 converts them to cubic feet. Divide cubic feet by 27 to get cubic yards.
Worked example
A 10 by 10 foot patio slab, 4 inches thick, poured with 80 lb bags and a 10 percent allowance:
| Volume (10 × 10 × 4 ÷ 12) | 33.33 cu ft |
|---|---|
| With 10% extra | 36.67 cu ft |
| Cubic yards (÷ 27) | 1.36 cu yd |
| 80 lb bags (÷ 0.60, rounded up) | 62 bags |
Switch to 60 lb bags and you'd need 82. At around a cubic yard and a half, many people compare the cost of bags with a ready-mix delivery.
Tips for an accurate pour
Check the depth in several spots
Ground is rarely flat. Measure the depth of your forms in a few places and use the average, or the deepest reading if you want to be safe. An extra half inch across a 10 by 10 slab adds about 4 cubic feet.
Footings and walls are slabs on edge
For a continuous footing, enter its length, its width in feet, and its depth as the thickness in inches. For a wall, enter the wall length, its height in feet as the width, and the wall thickness in inches.
Plan for the bags you mix
Sixty-plus bags is a lot of lifting and mixing. Have help and a mixer ready, and keep the bags dry until you use them. Follow the water amounts and curing steps on the bag for full strength.
Frequently asked questions
How many bags of concrete are in a cubic yard?
A cubic yard is 27 cubic feet. Using Quikrete's published yields, that's 45 bags of 80 lb mix (0.60 cubic feet each), 60 bags of 60 lb mix (0.45 cubic feet), or 90 bags of 40 lb mix (0.30 cubic feet), before any allowance for waste.
How thick should a concrete slab be?
Four inches is a common thickness for patios, walkways, and shed floors. Driveways and slabs that carry vehicles are often 5 to 6 inches. Local codes and your project plans decide the minimum, so check them before you pour.
How much extra concrete should I order?
Many people add 5 to 10 percent for uneven ground, spills, and forms that bow out. The calculator uses 10 percent by default. Running short in the middle of a pour causes a weak seam, so it's better to have a little left over.
Should I use bags or order ready-mix?
Bags work well for small jobs like post holes, steps, and small pads. For larger pours, mixing dozens of bags by hand is slow and the first batches can start to set before you finish. Many people switch to a ready-mix delivery once a job reaches about a cubic yard, but suppliers set their own minimum orders and fees, so call around.
How do I calculate concrete for a post hole?
Choose the round shape and enter the hole diameter and depth in inches. The calculator finds the volume of each hole as π × radius² × depth. It doesn't subtract the post itself, which leaves a small cushion. The fence calculator subtracts the post and gravel base if you want a tighter number.
Why does an 80 lb bag make less than a cubic foot?
Bagged concrete is dry cement, sand, and gravel. When you add water and mix, the particles pack together, so an 80 lb bag yields about 0.60 cubic feet of finished concrete. The yield printed on the bag is the number to use.
Sources
- QUIKRETE: Concrete Mix (No. 1101) data sheet, bag yields
- QUIKRETE: Fast-Setting Concrete Mix (No. 1004) data sheet
Results are estimates for planning purchases. Check product coverage, local building codes, and manufacturer instructions before you buy or build.